BH30-1011L Stainless Steel Emergency Shower Eyewash with Epoxy Coating

Main material: 304 stainless steel + green anti-corrosion epoxy 
resin, national standard thickness 3mm.
Product Description: The whole machine is made of SS304 stainless steel (nickel content more than 8).

Shower basin:260mm in diameter, 0.6mm in thickness,360-degree rotating shower head, no dead angles, large full-body coverage area, meeting and exceeding the US standard (required to be 1524mm above the ground and the shower head diameter to reach 508mm), shower flow rate greater than 76 L/min, Just at a height of 1524mm, reaching a coverage range of 508mm in diameter, fully meeting the US standard requirements for the flushing range of eyewash

The eyewash water outlet dust-proof device is made of soft rubber material, which makes eye-washing safer and prevents secondary injury, the fixed dust cover can be closed after the eyewash is completed to prevent loss and keep it clean and hygienic. (Avoid the situation where the chain-type movable dust cover is easily lost)

Adjustable flow device: the water flow rate can be adjusted at any time to effectively avoid unstable water pressure, so that the water output of the eyewash nozzles on both sides can cross and embrace at a height of 203mm, and the flow rate reaches and exceeds the international standard requirement of 12L/min. (please confirm that the on-site water pressure reaches 0.25mpa)

We choose a 1MM enlarged and thickened straight-edge basin, abandoning the original traditional eyewash basin shape. The straight-edge basin is deeper and can store more water. During actual use, it is not easy to overflow.

Luminous push board: round and comfortable, without edges and corners, to prevent scratches on fingers, and equipped with a luminous sign to make it easier for people to find it.

Eyewash assembly: Eyewash water supply and return pipe system (water inlet and waste water return pipes in the eyewash basin.) Cross-joint, tee-joint, and assembly elbows are all molded in one go, with smooth surface, strong pressure resistance, and long service life.

The upper and lower parts adopt two-piece ball valves, which are better than one-piece ball valves, with large aperture, and can meet the requirements of American standard for eyewash shower flow (shower≧75.7L/min, eyewash≧11.4L/min), and can flush effectively and quickly.

The shower horizontal pipe is made of stainless steel with a nickel content of 8. the above SS304 steel pipe+ ABS green epoxy spray coating, the pipe wall thickness is the national standard 3mm

Aluminum alloy(grade 6070 corrosion resistant our base is made of aluminum alloy die casting, which has high density and high strength and pressure resistance. (304 Stainless steel optional)

Other parameters:
1,Shower: Pull down the level, and the shower water will spray out from the shower basin within 1 second, and the shower flow rate is greater than or equal to 75.7 liters/min. 
2,Eyewash:Push the handle, and the mist eyewash water will spray out within 1second. The water outlet height and angle are designed according to the proportion of the human face. The eyewash flow rate is ≧11.4L/min. The on-site water pressure needs to reach 0.25-0.4MPA.
3,Eyewash filter:High-density PP+304 double-layer filter can impurities in the water, and the sprayed water is in the form of aerosol, embracing and gentle. 
4,Ball valve:The two-piece ball valve can make the water flow of the eyewash station more in line with American standards.
5,Eyewash assembly:304+epoxy spray casting parts are finely processed. The 90-degree elbow is seamless and has no welds. 
6,Base:Die-casting, high strength and pressure resistance, the picture shows yellow aluminum alloy, can also be replaced with stainless steel. 
7,Water inlet and outlet: DN32 national standard internal thread interface. 
8,Performance:It has good resistance to corrosive solutions such as acid, alkali, salt and oil. 
9,Function:Used in petroleum, chemical, beverage, medicine and other industries. When chemical liquid, toxic and harmful substances, and fire splash onto the body, face, and eyes of workers, the can be quickly rinsed to reduce the degree of harm. 
10,Standard:In compliance with US ANSIZ358.1-2014 standard.

11,Packaging specifications:Carton packaging, (74*28*23), 1 unit/carton, gross weight: 14.5KG . 
12,Quality Commitment:The material is 304 stainless steel. If it is fake, the penalty will be ten times.