The Installation Process of Bohua Combined Eyewash Stations: A Step-by-Step Journey

The eyewash station must be installed close to hazardous work areas, ready to be accessed swiftly in the event of an accident. Unobstructed and direct access is crucial, with the distance to the eyewash station being a straight line, avoiding any detours, to ensure the quickest possible reach. This is not just an installation—it's a lifeline being put in place. We at Bohua offer free training on the use and installation of our eyewash stations, ensuring that your team is not only equipped with the device but also with the knowledge to use it effectively.

1. 1. Site Selection: Choose a location near danger zones, typically within a 10 to 15-meter range and no more than 10 seconds' walk from any point where chemical exposure might occur .
2. . Component Assembly: Install components such as the showerhead, eyewash nozzle, and dust covers according to the instructions, ensuring tight connections without leaks. The showerhead should typically be installed to the left of the eyewash nozzle at a 45-90 degree angle .
3. . Operational Guidance: Train workers on how to properly use the safety equipment, including how to activate and deactivate the eyewash station and adjust the shower direction .
4. Accessibility and Obstacle-Free: Keep the rescue point clean and free of obstacles to ensure quick access in emergencies. The eyewash station should be clearly visible and easily reachable .
5. Rinsing Duration: In case of emergency use, the eyewash station should be used for a minimum of 10 to 15 minutes to ensure thorough flushing of harmful substances .